AI Tool Cleared as FAA Blames a Flooding Router for Nationwide Ground Stop
The US Transportation Department said on November 14 that the FAA's nationwide ground stop the day before followed routine work by contractor L3Harris to move a remote site's lines from copper to fiber, after a router flooded others in the air traffic control network with more than 1,000 connection attempts every four to five seconds, disrupting communications with aircraft and radar feeds. FAA Administrator Bryan Bedford said there was zero evidence the problem was nefarious or related to AI, after officials had said on Friday they were looking at SMART, the AI routing tool the FAA expanded nationwide on November 10. Officials say SMART is not connected to the core systems controllers use; whether the fault was installation error or a faulty router is not yet determined.

The newest system in American air traffic control got the first suspicion, and the oldest one is now taking the blame. Three days after the FAA expanded an AI routing tool to every en route centre in the country, a telecommunications failure grounded departures nationwide. On November 14, the Transportation Department said the trigger was a router installed during routine copper-to-fiber work, and the head of the FAA said there was "zero evidence" that AI was involved. What cleared the AI tool so quickly was a design fact officials kept repeating: it gives advice, and it is not wired into the systems that track aircraft.
What officials say happened#
At "at least one" remote FAA location, contractor L3Harris was doing routine maintenance to move telecommunication lines from old copper wire to fiber, Transportation Secretary Sean Duffy said at a press conference with FAA Administrator Bryan Bedford. The router involved "started flooding other routers in our air traffic control system," with "over 1,000 connection attempts every four to five seconds," which caused problems with communications with aircraft and "some disruption with our radar feeds," Duffy said, according to the department's transcript. The FAA then halted departures. "We haven't determined what the fault was," he said, framing the question as installation error by L3Harris or a faulty router. "We don't believe this was cyber at all."
The stop began shortly before 4 p.m. Eastern on November 13 and was lifted at about 8:15 p.m., with more than 3,500 aircraft in the air when it started, officials said. Bedford said the work was ordinary maintenance of the FAA's existing telecom network and "not part of" the separate $12.5 billion modernisation programme. L3Harris said it is supporting the FAA's investigation and has completed more than 70% of the planned conversion from copper to fiber, CNBC reported. Disruption ran into the weekend: FlightAware counted more than 6,000 US cancellations on Saturday as of 6 p.m. Eastern, on top of about 9,000 on Friday, according to CNBC.
Why the AI tool was in the frame#
Timing put it there. On November 10, the FAA said it would use SMART (Strategic Management of Airspace, Routes and Trajectories) in the airspace of all 22 of its en route centres, after a September start around Washington. The agency describes it as a cloud-based system that pulls about 200 data streams, including weather, flight paths and controller staffing, into one platform; FAA specialists validate its scheduling recommendations, and local facility leaders decide whether to act on them. Since September 21, the FAA says, it helped reroute 180 flights, saving about 10 minutes and almost 80 gallons of fuel per flight. SMART is built by Boston-based Air Space Intelligence under a 12-year, $875 million contract, GeekWire reported; the company raised $325 million at a $3 billion valuation in October.
On Friday, Homeland Security Secretary Markwayne Mullin said officials were looking at a possible link to SMART, including through CISA, GeekWire reported. Air Space Intelligence said that evening that the ground stop was "not based on or a result of the SMART system, any product of ASI or our integration with FAA and ATC," The Hill reported. By the evening briefing Duffy had ruled it out, saying SMART is not connected to the core systems controllers use to track flights: "There was no possible way SMART would have impacted what happened today." On Saturday, Bedford said there was "zero evidence" the problem was "nefarious" or related to artificial intelligence, CNBC reported.
The episode is a preview of a pattern rather than evidence against AI in critical systems: any new model-driven tool that ships just before an outage will be the default suspect. Here the separation between an advisory system and the operational network is what let officials clear it within hours, on their own account.
Limits#
- The cause is officials' preliminary account. Duffy said it is not yet determined whether the fault was an installation error or a faulty router, and we have seen no technical report.
- SMART's separation from the core systems is the description given by Duffy and the FAA; we have not seen an independent review of how it connects to FAA networks.
- Flight counts come from FlightAware via CNBC and vary between outlets and times of day.
Sources#
- US Department of Transportation: Secretary Duffy provides update on restoration of airspace following nationwide ground stop (November 14, 2026)
- FAA: General statements, including "SMART Expanding Across the Nation" (November 10, 2026) and ground stop statement (November 13, 2026)
- CNBC: Nationwide ground stop followed contractor upgrade to L3Harris telecommunication system (November 14, 2026)
- GeekWire: Officials blame aging FAA telecom gear as U.S. airspace reopens (November 13, 2026)
- The Hill: Company behind FAA AI tool denies link to ground stop (November 13, 2026)